So I've been off the grid on this site for awhile. If any of you remember I did the 3.7 manifold swap and my zdx throttle body swap on my 05 TL back a while back... anyways. I recently bought a set of 3.5 heads. They were milled for 12:1 compression, port and polished, with 5 angle valve job...It was 500 for the pair. There is couple things missing. Vtec pin that locks the lobes together, Spring valves, retainers, and the cams. Has all the valves in place still... Also got a hold of 3.7 internals crank rods and pistons. It got warranted out for oil consumption. So I know I need at least new piston rings sets for all the pistons... the crank perfect. But needs new mains and I don't know what color of mains yet. Also the connecting rod bearings...this is my first official build... I will take my time and get things right. So I need a lil guidance.. any advice would be awesome. Anything would help. I don't want to go turbo or super. I know I'm not gonna get 350 and above. But I'll be happy. This is what I want... thanks for taking the time to read all this.
↧