Doing the shocks and springs on my 2006 TL. In putting the Konis together I have no Bump Stop Plate. It is the washer between the Bump stop and the lower of the two similar Rubber Bushings.
Was it supposed to be included with the Konis? The Cup and Collar that were the old bump Stop Plate were unremovable from the OEM shocks. They were Rusted solid on and I had to cut the top washer
and nut off and cut the shock spindle in half to remove the bump stop itself. Damn salt and snow up north here. Any ideas if I need the Bump Stop Plate or not or if I can pick a comparable one up locally
