Hi, sorry to post in the TL section because the RL section is basically gone, no one! Short story, I just got an alignment for my lowered RL. Thanks god the tech was able to loosen the bolt connected to the tie rod after penetrated with oil. Anyway, the tech told me to get a camber kit and raise the rear up because once I install the camber kit the wheels are going to be rubbed. So I need some alignment expert to help me out. Please take a look at the spec sheet and tell me if I need it or not and to what degree. The car is lowered ~1.5" in the front a tight 2 fingers, and the rear is tucking ~2.8". I really like the look and the handling of the car now. I really dont want to install the rear camber kit because as mentioned the rear is going to be rubbed. So take a look at the spec and tell me. Thanks.
↧